Heavy Wall Tube

Model A-3

Pipe & Tube Bending Machine

The Model A-3 is the smallest of the floor mounted bending machines manufactured by Pedrick. Like all Pedrick bending machines, it is a rotary head compression bender that is driven with a mechanical drive. It produces 9,000 inch pounds of bending moment. It is capable of bending 1.250 INch schedule 40 pipe. It is popular for many furniture and extrusion bending applications. This model shares the same platform as the Model A-5 shown. They both provide a very large bending capacity with a small footprint.

HP Bending Moment Pipe Capacity Tube Capacity (crew) Round Bar stock Approx. Weight Spindle Diameter Floor Space
3 9,000 IN-LBS 1.250 IN SCH 40 1.625 IN OD X .125 WT 1.250 IN OD 1600 LBS 3 IN 3 FT X 3 FT
2.2 KW 1019 N-M 42.1 MM 42 MM X 3.1 MM 31 MM 726 KG 76.2 MM .9 M X .9 M

Model A-5

Pipe & Tube Bending Machine

The Model A-5 Bending machine has the same housing as the Model A-3, with heavier gears, bearings and a 5 HP gear drive. It has the capacity to bend 2 inch schedule 40 IPS and #12 rebar. This machine is very popular for handrail applications. Pedrick benders can be tooled to bend a variety of materials including channels, rectangular tube, structurals, and many others. The adjacent bender and insert show an application for bending 1 inch OD solid bar stock to 1/2 inch inside radius. These parts are used for lifting eyes for concrete products.

HP Bending Moment Pipe Capacity Tube Capacity (crew) Round Bar stock Approx. Weight Spindle Diameter Floor Space
5 20,000 IN-LBS 2 IN SCH 40 2.375 IN OD X .187 WT 1.500 IN OD 1750 LBS 3 IN 3 FT X 3 FT
3.7 KW 1900 N-M 60.3 MM 60 MM X 4.7 MM 38 MM 795 KG 76.2 MM .9 M X .9 M

Model A-5

Pipe & Tube Bending Machine

The Model A-5 Bending machine has the same housing as the Model A-3, with heavier gears, bearings and a 5 HP gear drive. It has the capacity to bend 2 inch schedule 40 IPS and #12 rebar. This machine is very popular for handrail applications. Pedrick benders can be tooled to bend a variety of materials including channels, rectangular tube, structurals, and many others. The adjacent bender and insert show an application for bending 1 inch OD solid bar stock to 1/2 inch inside radius. These parts are used for lifting eyes for concrete products.

HP Bending Moment Pipe Capacity Tube Capacity (crew) Round Bar stock Approx. Weight Spindle Diameter Floor Space
5 20,000 IN-LBS 2 IN SCH 40 2.375 IN OD X .187 WT 1.500 IN OD 1750 LBS 3 IN 3 FT X 3 FT
3.7 KW 1900 N-M 60.3 MM 60 MM x 4.7 MM 38 MM 795 KG 76.2 MM .9 M X .9 M

Model A-7

Pipe & Tube Bending Machine

The Model A-7 is the most popular bending machine manufactured by Pedrick. It is a heavy duty version of the Model A-5. The Model A-7’s primary application is for bending 1/2 inch – 2 inch schedule 80 pipe for small bore process piping for plant maintenance and many original equipment manufacturing (OEM) applications. Bends produced on a 3D bend radius meet American Petroleum Institute (API) specifications for ovality (flattening) and wall thinning.

HP Bending Moment Pipe Capacity Tube Capacity (crew) Round Bar stock Approx. Weight Spindle Diameter Floor Space
5 28,500 IN-LBS 2 IN SCH 80 2.375 IN OD X .218 WT 1.750 IN OD 2000 LBS 3 IN 3.5 FT X 3.5 FT
3.7 KW 3192 N-M 60.3 MM 60 MM X 5.5 MM 44 MM 909 KG 76.3 MM 1 M X 1 M

Model A-7

Pipe & Tube Bending Machine

The Model A-7 is the most popular bending machine manufactured by Pedrick. It is a heavy duty version of the Model A-5. The Model A-7’s primary application is for bending 1/2 inch – 2 inch schedule 80 pipe for small bore process piping for plant maintenance and many original equipment manufacturing (OEM) applications. Bends produced on a 3D bend radius meet American Petroleum Institute (API) specifications for ovality (flattening) and wall thinning.

HP Bending Moment Pipe Capacity Tube Capacity (crew) Round Bar stock Approx. Weight Spindle Diameter Floor Space
5 28,500 IN-LBS 2 IN SCH 80 2.375 IN OD X .218 WT 1.750 IN OD 2000 LBS 3 IN 3.5 FT X 3.5 FT
3.7 KW 3192 N-M 60.3 MM 60 MM X 5.5 MM 44 MM 909 KG 76.3 MM 1 M X 1 M

Model B-10

Pipe & Tube Bending Machine

The Pedrick Model B-10 bender offers an exceptional value. It is a heavy duty bending machine that creates a bending moment of 75,000 inch-LBS This is three times the capacity of the Pedrick Model A-7 bending machine at less than two times the price! Like all Pedrick benders, this model is typically supplied with limit switches, which can be set for repetitive bending. Digital controls are also available. The bender shown on the left is tooled to bend 3/8 inch x 12 inch A36 plates to 1.500 INch inside radius, 0-180 degrees. Dies were provided to bend a variety of plate sizes up to and including 1/2 inch x 12 inch plates to bend radii ranging from 1.500 INch to 12 inch. A large shipbuilding company uses the bent parts for cable collars through bulkheads.

HP Bending Moment Pipe Capacity Tube Capacity (crew) Round Bar stock Approx. Weight Spindle Diameter Floor Space
10 75,000 IN-LBS 2 IN SCH 80 2.875 IN OD X .187 WT 2.500 IN OD 6500 LBS 4.500 IN 4 FT x 4 FT
3.75 KW 8500 N-M 73 MM 73 MM X 5.2 MM 64 MM 2955 KG 114 MM 1.2 M X 1.2 M

Model B-10

Pipe & Tube Bending Machine

The Pedrick Model B-10 bender offers an exceptional value. It is a heavy duty bending machine that creates a bending moment of 75,000 inch-LBS This is three times the capacity of the Pedrick Model A-7 bending machine at less than two times the price! Like all Pedrick benders, this model is typically supplied with limit switches, which can be set for repetitive bending. Digital controls are also available. The bender shown on the left is tooled to bend 3/8 inch x 12 inch A36 plates to 1.500 INch inside radius, 0-180 degrees. Dies were provided to bend a variety of plate sizes up to and including 1/2 inch x 12 inch plates to bend radii ranging from 1.500 INch to 12 inch. A large shipbuilding company uses the bent parts for cable collars through bulkheads.

HP Bending Moment Pipe Capacity Tube Capacity (crew) Round Bar stock Approx. Weight Spindle Diameter Floor Space
10 75,000 IN-LBS 2 IN SCH 80 2.875 IN OD X .187 WT 2.500 IN OD 6500 LBS 4.500 IN 4 FT X 4 FT
3.75 KW 8500 N-M 73 MM 73 MM X 5.2 MM 64 MM 2955 KG 114 MM 1.2 M X 1.2 M

Model D-10

Pipe & Tube Bending Machine

The Model D-10 is a very powerful machine. It is supplied with a two piece spindle. This model has become a standard in many forging shops that bend large solid bar stock Like all Pedrick benders this machine provides a tremendous bending force yet doesn’t require a great deal of floor space. The bender shown is set up to bend 3 1/2 inch OD x .562 WT stainless steel tubing to a 10.5 inch (3D) centerline radius. This was required by a company that manufactures hydraulic systems. This bender has been installed in many power and steam generating plants for plant maintenance.

HP Bending Moment Pipe Capacity Tube Capacity (crew) Round Bar stock Approx. Weight Spindle Diameter Floor Space
10 100,000 IN-LBS 3 IN SCH 80 3.500 IN OD X .312 WT 3 IN OD 7000 LBS 4.500 IN 4 FT X 5 FT
7.5 KW 11,300 N-M 88.9 MM 89 MM X 7.9 MM 76 MM 3175 KG 114 MM 1.2 M X 1.5 M

Model D-15

Pipe & Tube Bending Machine

The Model D-15 is the most popular large bender that is manufactured by Pedrick. Like the Model A-7 it is used in many maintenance applications. It is typically supplied with a 4.500 INch OD, heat treated, alloy steel, one piece center spindle. When added flexibility is required we can supply the machine with a two piece center spindle. With this feature one machine can be tooled to bend 1/2 inch to 4 inch schedule 80 pipe! We have shipped this model all over the world. It is in use by manufacturers of industrial compressors, turbines, and by companies that have a requirement to bend large diameter heavy walled tubing. In the foreground of the photograph to the left there is a zero tangent bend produced in 4 inch schedule 80 IPS. Like the Model A-7 it used in many plant maintenance and original equipment manufacturing (OEM) applications.

HP Bending Moment Pipe Capacity Tube Capacity (crew) Round Bar stock Approx. Weight Spindle Diameter Floor Space
15 150,000 IN-LBS 4 IN SCH 80 4.500 IN OD X .375 WT 7500 LBS 4.500 IN 5 FT x 5 FT
11.25 KW 17,000 N-M 101.6 MM 101 MM X 9.5 MM 3401 KG 114 MM 1.5 M X 1.5 M

Model D-15

Pipe & Tube Bending Machine

The Model D-15 is the most popular large bender that is manufactured by Pedrick. Like the Model A-7 it is used in many maintenance applications. It is typically supplied with a 4.500 INch OD, heat treated, alloy steel, one piece center spindle. When added flexibility is required we can supply the machine with a two piece center spindle. With this feature one machine can be tooled to bend 1/2 inch to 4 inch schedule 80 pipe! We have shipped this model all over the world. It is in use by manufacturers of industrial compressors, turbines, and by companies that have a requirement to bend large diameter heavy walled tubing. In the foreground of the photograph to the left there is a zero tangent bend produced in 4 inch schedule 80 IPS. Like the Model A-7 it used in many plant maintenance and original equipment manufacturing (OEM) applications.

HP Bending Moment Pipe Capacity Tube Capacity (crew) Round Bar stock Approx. Weight Spindle Diameter Floor Space
15 150,000 IN-LBS 4 IN SCH 80 4.5 IN OD X .375 WT 7500 LBS 4.500 IN 5 FT X 5 FT
11.25 KW 17,000 N-M 101.6 MM 101 MM X 9.5 MM 3401 KG 114 MM 1.5 M X 1.5 M